GSA Auctions Hand Tools and Shop Equipment Update

CURRENT BID: $25.0 STATE: KY NO. OF BIDDERS: 0 CLOSE TIME: Fri, 20 Mar 2026 17:40:00 CST

Overview

(15) Drill bits in used condition. The drill bits include various sizes and types, with some manufactured by Republic Drill Corporation. The exact condition of these assets is unknown and they are untested.

Key Features

• Includes high speed standard #4MT taper shank drill bits.
• Various sizes ranging from smaller twist drill bits to larger diameter bits.
• Black oxide finish on most drill bits.
• Morse taper shank design on larger bits for secure chuck mounting.

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• The drill bits show signs of previous use with visible wear on cutting edges.
• Some bits display manufacturer labels and part numbers including Republic Drill Corporation branding.
• Minor surface rust and discoloration visible on several bits.
• The assets could contain broken or missing pieces, function issues, rust, dirt, or scratches.
• Storage container shows staining and debris accumulation.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, 9:30am – 3pm EDT, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Local Pickup Only: This lot is designated for local pickup only and cannot be shipped via UPS Ground.
• No Extensions: No auctioned assets will be granted removal extensions.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $25.0 STATE: KY NO. OF BIDDERS: 0 CLOSE TIME: Fri, 20 Mar 2026 17:37:00 CST

Overview

 (6) Torque wrenches in repairable condition. The wrenches show signs of use and wear, with various measurement scales and different handle configurations.

Key Features

• Multiple torque measurement scales including foot-pounds and meter measurements.
• Various handle lengths and configurations for different applications.
• Different torque ranges across the wrenches in the lot.

Condition & Markings

• This lot is in repairable condition. 
• Multiple wrenches display red “REJECTED” stickers from Navy Metal Program with dates from 2018.
• Visible wear and scratches on metal surfaces and handles.
• Some gauge faces show discoloration and wear.
• Various inventory and identification labels are attached to the wrenches.
• The exact condition is unknown 

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, 9:30am – 3pm EDT, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Local pickup only, no UPS Ground shipping available.
• No auctioned assets will be granted removal extensions.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 325.0 STATE: PA NO. OF BIDDERS: 2 CLOSE TIME: Fri, 20 Mar 2026 17:05:00 CST

Overview

(1) Fastening Systems International K-3000-MIL-1 Composite Material Repair Tool Kit in repairable condition. The kit includes multiple sections within the main case with all slots filled, and includes a Clayton Vacuum Sanding System Hornet ACE-400 in a smaller black case. The operating condition is unknown for both systems.

Specifications

• Make: Fastening Systems International
• Model: K-3000-MIL-1
• NSN: 4920-01-628-2469
• Date of Manufacture: 07/08/2020
• Clayton Vacuum Sanding System:
• Model: Hornet ACE-400

Key Features

• Includes comprehensive tool kit with multiple organized sections containing various composite repair tools and components.
• Contains drilling equipment, measuring tools, heating controllers, vacuum systems, and specialized composite repair materials.
• Includes detailed documentation and parts breakdown manual for the K-3000-MIL-1 system.
• Features organized foam inserts with designated slots for each tool and component.
• Includes digital scale, cutting tools, and various sized drill bits and fasteners.

Condition & Markings

• This lot is in repairable condition. Parts may be missing.
• The operating condition is unknown for both the main tool kit and the Clayton vacuum sanding system.
• All visible components appear to be present in their designated foam slots.
• The cases show normal handling wear but appear structurally sound.
• NSN marking 4920-01-628-2469 is visible on the equipment identification plate.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, 8 AM to 3 PM, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $100.0 STATE: WV NO. OF BIDDERS: 0 CLOSE TIME: Fri, 20 Mar 2026 17:02:00 CST

Overview

(1) 2005 BendPak HD-12-B vehicle lift. The item is in usable condition and includes two rolling bridge jacks RJ60. The lift is constructed from heavy-gauge steel with long runways, multi-position safety locks, and anti-sway stability features.

Specifications

• Make: BendPak
• Model: HD-12-B
• Model Year: 2005
• Lifting Capacity: 12,000 lbs
• Rolling Bridge Jacks Model: RJ-60
• Rolling Bridge Jacks Serial Number: 500003528-013
• Rolling Bridge Jacks Lift Capacity: 6000 lbs/2722 kg
• Rolling Bridge Jacks Date of Manufacture: 09/13/13

Key Features

• Four-post lift design with blue painted steel construction.
• Hydraulic lifting system with pressure gauge and control valves.
• Multi-position safety locks for secure vehicle positioning.
• Long runways to accommodate various vehicle sizes.
• Anti-sway stability system for enhanced safety.
• Includes installation and operation manual.
• ALI certified automotive lift with proper safety certifications.

Condition & Markings

• Parts may be missing, and repairs may be required.
• The lift shows normal wear from use with some surface dirt and minor scuffing on the runways.
• All major components appear to be present and intact.
• The hydraulic system components are visible and appear complete.
• Safety labels and warning decals are present on the equipment.
• The rolling bridge jacks show signs of use with some surface wear.
• No known deficiencies reported by the custodian.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Must be removed by bidder.
• POC for Public Viewing or Inspection: Daryl Johnson daryl_johnson@fws.gov 304-209-4092.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $15.0 STATE: CO NO. OF BIDDERS: 0 CLOSE TIME: Fri, 20 Mar 2026 16:33:00 CST

Overview

This lot contains (1) Trinco dry abrasive blast cabinet model 80 PTS. The item is classified in usable condition. The cabinet is an enclosed type designed for surface cleaning, rust removal, finishing, and prep work. The working condition is unknown.

Specifications

• Make: Trinco
• Model: 80 PTS
• Motor: Leeson motor (TEFC) driving dust collection/blower
• Dimensions: 64″L x 24″D x 28″H
• Weight: 250-300 lbs

Key Features

• Enclosed dry abrasive blast cabinet designed for surface cleaning, rust removal, finishing, and prep work.
• Equipped with dust collection and blower system.
• Manufactured in the USA.

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• Working condition is unknown.
• Item is sold as is.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer is responsible for removal of property, shipping and handling costs.
• Must call to schedule removal and/or inspection of property, by appointment only.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

Item Control Number :1482M1-6005-0004

]]>