GSA Auctions Hand Tools and Shop Equipment Update

CURRENT BID: 500.0 STATE: MN NO. OF BIDDERS: 1 CLOSE TIME: Tue, 7 Apr 2026 17:22:00 CST

Overview

(1) PRO FAB AIR WELDER model BSM226. The equipment is classified in unused condition and has never been installed.

Specifications

• Make: PRO FAB
• Model: BSM226

Condition & Markings

• This lot is in new condition. Parts may be missing, and repairs may be required.
• The equipment has never been installed.
• Exact condition is unknown.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Hours of operation are Monday through Friday 8:00 to 4:00, closed weekends and holidays.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 531.0 STATE: MN NO. OF BIDDERS: 2 CLOSE TIME: Tue, 7 Apr 2026 17:12:00 CST

Overview

(1) Mobile Single Post Lift model MSC-6KLP. The item is classified in unused condition. The lift has been assembled but not used due to wrong model selection. The exact condition is unknown and parts and repairs may be required.

Key Features

• Mobile single post design for vehicle lifting applications.
• Model MSC-6KLP configuration.
• Assembled unit ready for installation.

Condition & Markings

• This lot is in new condition. Parts may be missing, and repairs may be required.
• The lift has been assembled but remains unused.
• Exact operational condition is unknown and requires inspection.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Pick up is by appointment only with hours of operation Monday through Friday 8:00 to 4:00, closed weekends and holidays.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $500.0 STATE: ME NO. OF BIDDERS: 0 CLOSE TIME: Tue, 7 Apr 2026 14:01:00 CST

Overview

(1) 1977 Leroi Company 125R air compressor. The compressor is classified in repairable condition. The unit does run but operating condition is not guaranteed, has been sitting outside, and was last started approximately one year ago.

Specifications

• Make: Leroi Company
• Model: 125R
• Model Year: 1977
• Capacity: 125 CFM
• Operating Pressure: 100-150 psi
• Type: Portable oil-flooded rotary screw air compressor
• Cooling: Air-cooled
• Date of Manufacture: 12/09/1976

Condition & Markings

• This lot is in repairable condition. Parts may be missing, and repairs may be required.
• The compressor has been stored outside and shows signs of weather exposure.
• Operating condition is not guaranteed despite the unit running when last tested.
• The compressor was last started approximately one year ago.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Item available for pick up only.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $40.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Tue, 7 Apr 2026 13:02:00 CST

Overview

This lot contains an MI-T-M 20 gallon electric air compressor. The item is classified in repairable condition as the operating condition is unknown and has not been tested. The compressor is mounted on a wheeled cart and includes a Baldor industrial motor. 

Specifications

• Make: MI-T-M
• Model: AM2-P305-30K
• Serial Number: 20088376
• Tank Capacity: 20 gallon
• Air Flow: 19 CFM
• Maximum Pressure: 175 PSI
• Motor: Baldor Industrial Motor
• Motor HP: 5
• Voltage: 208-230/460
• Amperage: 13-12.2/6.1
• RPM: 3450
• Dimensions: 48 inches long x 40 inches wide x 48 inches high

Key Features

• Portable wheeled cart design for mobility.
• Electrical control box with contactors and overload protection.
• Pressure gauge and air outlet connections.

Condition & Markings

• This lot is in repairable condition. Parts may be missing, and repairs may be required.
• Operating condition is unknown and unable to test.
• Missing electrical power box cover.
• Tires are flat.
• Item is positioned on a pallet but not secured to pallet and not suitable for shipping as it sits.
• Visible wear and weathering on exterior surfaces.
• Some rust and corrosion present on metal components.
• Electrical wiring and components are exposed due to missing cover.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 25.0 STATE: WA NO. OF BIDDERS: 1 CLOSE TIME: Tue, 7 Apr 2026 12:30:00 CST

Overview

This lot contains (1) stationary compressor. **NOTE: The item is classified in SCRAP condition. The lot includes an Ingersoll Rand air compressor with 125 PSIG and 460 volts specifications, along with a 120-gallon tank capacity, and a ZEKS compressed air solutions unit.

Specifications

• Ingersoll Rand Air Compressor:
• Pressure Rating: 125 PSIG
• Voltage: 460 Volts
• Tank Capacity: 120 Gallons
• ZEKS Compressed Air Solutions:
• Model: 800HSFA408

Condition & Markings

• This lot is in SCRAP condition. Parts are missing, and repairs are required.
• The compressor system shows manufacturer markings for both Ingersoll Rand and ZEKS components.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted. (ICN: W68SBV-6058-0001)

]]>

CURRENT BID: $100.0 STATE: CA NO. OF BIDDERS: 0 CLOSE TIME: Tue, 7 Apr 2026 10:06:00 CST

For more information, please contact Duan Mitchell @ (206) 836-1029 or duan.r.mitchell@uscg.mil

Overview

This lot contains a Simpson PS3228-S pressure washer. 

Key Features

• Gas-powered engine with pull-start mechanism.
• Wheeled frame design for portability.
• Control panel with pressure adjustment settings.
• Integrated hose storage and spray gun holder.
• Heavy-duty pump assembly.

Condition & Markings

• Parts may be missing, and repairs may be required.
• The unit shows signs of previous use with surface wear on the frame and components.
• Some dirt and staining visible on exterior surfaces.
• MCS marking: Z37420-5310-P001.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• Sold “as is”
• The condition of the property is not warranted. Pictures are not warranted. (Z37420-6012-0619)

]]>