GSA Auctions Hand Tools and Shop Equipment Update

CURRENT BID: $100.0 STATE: MS NO. OF BIDDERS: 0 CLOSE TIME: Fri, 1 May 2026 17:58:00 CST

Overview

(1) Ingersoll-Rand Compressor SSR-EP200. The compressor is classified in salvage condition. The operational condition is unknown.

Specifications

• Make: Ingersoll-Rand
• Model: SSR-EP200
• Serial Number: F7867U93193
• Length: 123″
• Width: 62.5″
• Height: 72″

Condition & Markings

• The operational condition is unknown.
• Bar tag DH401 is present.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer is responsible for all aspects of removal including manpower, lift and transport.
• Please contact DANIEL HARRIS for further information at 520-929-6727.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $100.0 STATE: MS NO. OF BIDDERS: 0 CLOSE TIME: Fri, 1 May 2026 17:48:00 CST

Overview

(1) Ingersoll-Rand SSR-EP200 compressor. The compressor is classified in salvage condition. The operational condition is unknown.

Specifications

• Make: INGERSOLL-RAND
• Model: SSR-EP200
• Serial Number: F7832U93160
• Dimensions: 62.5″ W x 72″ H x 123″ L

Condition & Markings

• The operational condition is unknown.
• The compressor displays bar tag DH400.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer is responsible for all aspects of removal including manpower, lift and transport.
• Please contact DANIEL HARRIS for further information at 520-929-6727.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 50.0 STATE: IA NO. OF BIDDERS: 2 CLOSE TIME: Fri, 1 May 2026 15:01:00 CST

Overview

This lot contains (1) MaxAir P4125H1 25 Gallon Electric Air Compressor. The air compressor is classified in repairable condition. 

Specifications

• Make: MAXAIR
• Model: P4125H1

Key Features

• 25 gallon capacity vertical air tank.
• Electric powered compressor unit.
• Stationary design with tank-mounted configuration.

Condition & Markings

• This lot is in repairable condition. Parts may be missing, and repairs may be required.
• Unit displays model number 636 marking on the equipment.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

636 MX1606213

Item Control Number :366106-6097-0001

]]>

CURRENT BID: $50.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Fri, 1 May 2026 13:05:00 CST

Overview

This lot contains a Nilfisk Advance Adfinity 20D power floor scrubber machine. This lot is in used condition. The machine was last reported as functional from service when turned in, but has not been tested or verified for operability. The unit shows signs of age and wear consistent with previous use.

Key Features

• Walk-behind floor scrubber with rotating brush system for cleaning hard floor surfaces.
• Equipped with solution tank and recovery tank for water and cleaning solution management.
• Features wheeled mobility with front caster wheels and rear drive wheels.
• Includes vacuum hose and suction system for liquid recovery.
• Control panel with operational indicators and key switch for machine operation.

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• The machine shows significant wear and aging throughout, with refurbishment likely required.
• Visible dirt, grime, and staining on exterior surfaces and components.
• Scrub brush shows wear and debris accumulation on bristles.
• Wheels and casters show wear from use with dirt and debris buildup.
• Various warning and operational labels are present on the machine.
• Model identification plate visible showing “Scrubber Dryer Adfinity 20D” specifications.
• Machine has not been tested or verified for current operational status.
• Heavy unit requiring special shipping accommodations for transport.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• The agency will not assist with shipping.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 25.0 STATE: CO NO. OF BIDDERS: 1 CLOSE TIME: Fri, 1 May 2026 11:29:00 CST

Overview

This lot contains (1) Sears piston air compressor, model 106.170511. The compressor is classified in usable condition. The unit is mounted on a cart and includes no service records. (898277-6063-EF03)

Specifications

• Make: Sears 
• Model: 106.170511

Key Features

• The compressor is bolted onto a cart that measures 2 x 4 x 15H.

Condition & Markings

• There are no service records available for this unit.
• Repairs may be needed and working condition is not guaranteed.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Inspection and removal are by appointment from this access controlled location Monday through Thursday, 08:00 am to 02:30 pm, MT.
• US Citizens with valid Federal or State picture ID required.
• This item has been reviewed for high risk property concerns and is controlled by the U.S. Department of Commerce.
• Any winning bidders must not be listed on the U.S. Consolidated Screening List, a list of parties for which the U.S. Government maintains restrictions on business transactions, including certain exports, reexports, or transfers of items.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>