CURRENT BID: $25.0 STATE: PA NO. OF BIDDERS: 0 CLOSE TIME: Fri, 27 Feb 2026 17:25:00 CST
Twenty one Kennedy metal toolboxes. The toolboxes feature multi-drawer configurations and are red in color. The operating condition is unknown.
Key Features
- Multi-drawer storage configuration with various drawer sizes.
- Metal construction with red finish.
- Dual latch closure system with metal clasps.
- Carrying handle on top section.
- Stackable design with top chest and bottom cabinet sections.
- Kennedy Mfg. Co. branding visible on units.
Condition & Markings
- This lot is in used condition. Parts may be missing, and repairs may be required.
- Operating condition is unknown.
- Units display Kennedy Mfg. Co. Van Wert, Ohio U.S.A. markings.
- Various inventory tags and labels are visible on the toolboxes.
- Some units show minor surface wear consistent with previous use.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, 8 AM to 3 PM EDT, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
Disclaimer
- The condition of the property is not warranted. Pictures are not warranted.
]]>
CURRENT BID: $25.0 STATE: KY NO. OF BIDDERS: 0 CLOSE TIME: Fri, 27 Feb 2026 17:19:00 CST
One Molex pliers in used condition and was noted to be in useable condition when received, though current condition is unverified.
Specifications
- Make: Molex
- Model: 63811-1100 Rev E
Key Features
- Hand crimp tool designed for 3.18mm (.125″) diameter HCS-125 pin and socket crimp terminals.
- Full cycle ratcheting mechanism ensures complete crimps.
- Ergonomically designed soft handles with red grips.
- Precisely designed crimping profiles with sample contact positioning.
- Compatible with 10-14 AWG wire sizes.
- Includes original specification sheet and packaging.
Condition & Markings
- This lot is in used condition. Parts may be missing, and repairs may be required.
- The tool shows minimal signs of use with intact handles and functional ratcheting mechanism.
- All markings on the tool head are clearly visible including model number and revision information.
- The original packaging shows wear and discoloration but remains intact.
- The specification sheet is present and readable.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, 9:30am – 3pm EDT, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
- Shipping Available: To ship, the winning bidder must provide a USPS Flat Rate Label for an appropriately sized Flat Rate Priority Box.. Contact us to select appropriate packaging. Envelopes are not used. Shipping may be denied if conditions are not met.
- No removal extensions will be granted.
Disclaimer
- The condition of the property is not warranted. Pictures are not warranted.
]]>
CURRENT BID: 25.0 STATE: KY NO. OF BIDDERS: 1 CLOSE TIME: Fri, 27 Feb 2026 17:18:00 CST
One Lejeune electric shear wrench in useable condition when received, however current condition is unknown. The wrench appears to be housed in a protective carrying case with instruction manual and power cable.
Specifications
- Make: Lejeune
- Model: S-90EZ
- Serial Number: 10704
- Power Output: 1200W
- Voltage: 115V
- Current: 12A
- Frequency: 50/60Hz
- Speed: 15RPM
- Maximum Torque: 804 Nm
Key Features
- Includes original instruction manual for electric shear wrenches model 0608EZ.
- Comes with power cable and electrical connector.
- Housed in metal carrying case with latches and handle for transport.
- Tool appears to be wrapped in protective bubble wrap material.
Condition & Markings
- This lot is in used condition. Parts may be missing, and repairs may be required.
- Current condition is unknown and untested.
- Tool has visible markings including “10704” written in red on the housing.
- Carrying case shows normal wear and has various identification labels and stickers.
- Case exterior displays number “105949” and other administrative markings.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, 9:30am – 3pm EDT, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
- Local Pickup Only: This item is available for local pickup only, no UPS Ground shipping.
- No Extensions: No auctioned assets will be granted removal extensions.
Disclaimer
- The condition of the property is not warranted. Pictures are not warranted.
]]>
CURRENT BID: $25.0 STATE: PA NO. OF BIDDERS: 0 CLOSE TIME: Fri, 27 Feb 2026 17:03:00 CST
Ingersoll-Rand 2340 air compressor in repairable condition. The compressor operating condition is unknown and requires a power cord. The unit shows signs of wear and surface staining consistent with previous use.
Specifications
- Make: Ingersoll-Rand
- Model: 2340
- Serial Number: 02007894
- Power Requirements: 230V, 60Hz, Single Phase
- Motor: 5.0 HP, 3450 RPM
- Dimensions: 29″ Long x 22″ Wide x 68″ Tall
Key Features
- Vertical tank configuration with top-mounted motor and pump assembly.
- Equipped with pressure switch and safety relief valve.
- Features air intake filter and cooling fan assembly.
- Includes pressure gauge and drain valve at tank bottom.
Condition & Markings
- This lot is in repairable condition. Parts may be missing, and repairs may be required.
- The unit requires a power cord for operation.
- Operating condition is unknown.
- Visible surface staining and discoloration on the tank exterior.
- Shows general wear consistent with previous use.
- Unit is mounted on a wooden pallet for transport.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday from 8 AM to 3 PM; by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
Disclaimer
- The condition of the property is not warranted. Pictures are not warranted.
***Hazardous material clause: For any hazardous material sold at gsaauctions.gov, the purchaser will comply with all applicable federal, state, and local laws, ordinances, and regulations with respect to the care, handling, storage, shipment, resale, export, or other use of the material purchased. The purchaser will hold the government harmless from any and all debts, liabilities, judgements, costs, demands, suits, actions, or other claims of any nature arising from or incident to the handling, use, storage, shipment, resale, export, or other disposition of the hazardous items purchased. * The successful bidder of this lot will be required to sign a Hazardous Material letter before attempting to remove this property from its current site. Click on the below Hazardous Letter under Additional Documents link to print, sign and email to shannell.long@gsa.gov or fax to 202-692-3222. Payment will be blocked until the required form is received***
]]>